Checking Fuel Line Connections For Leaks And Tight
1. Remove complete air cleaner. Visually inspect for leaks.
2. Tighten coupling nuts, while counter-holding with a second open-end wrench.
3. Tighten hose clamp on pressure regulator.
3. Tighten hose clamp on pressure regulator.



Replacing Fuel Filter Checking Line Connections for Leaks and Tight Fit
TESTING AND ADJUSTING VALUES FOR LH - JETRONIC - TYPE 928 Engine Type M 28.43/44
Test Step |
Specification |
Remarks |
Electrics fuel pump delivery rate |
at least 1350 cm3/30 sec. |
Post a comment