Assembly instructions

The two halves of the brake caliper must not be separated.

The piston sealing rings, dirt scraper rings and spring plates can be changed while the fixed caliper is assembled.

To remove the spring plates, heat the retaining screws with a hot-air blower to approx. 150°C; this is because the screws are inserted with a locking agent. Do not re-use the screws. Coat the threads of the new screws lightly with Loctite 270. When installing the brake pistons, use Unisilikon TK 44 N 2 brake cylinder paste (this also applies to earlier types of brake caliper if repairs become necessary). Unisilikon paste is available as a spare part, available as a spare part (part number 000.043.117.00).

X = Never unscrew and retighten these screws

0 0

Post a comment