Safety requirements

Test and assembly operations must only be carried out by qualified personnel.

Before working on the airbag system or on adjacent components that entail a risk of live components getting near the airbag system, the following safety requirements must be observed at all times:

1. Switch off ignition.

2. Disconnect and cover negative battery terminal.

After the battery has been disconnected, assembly operations or other jobs that require the use of a hammer or similar tools must only be performed after a waiting time of 20 minutes has elapsed. This is required to ensure that the power supply to the airbag system is interrupted and to make sure the airbag is not triggered inadvertently.

For further safety requirements, refer to Repair Group 68.

0 0

Post a comment