Determining engine speed sender clearance Tiptronic vehicles

Remove right-hand rear wheel and take off right heater hose from heat exchanger! No. Operation Instructions

Remove sender Align flywheel

Measure clearance

Measure plug-in depth of the sender

Determine actual value

Establishing the specified value: 1 ±0.2 mm

Correct setting

Undo upper M 6 x 16 pan head screw.

Rotate crankshaft or flywheel, respectively, and align a tooth of the flywheel to the center of the sender housing.

Determine the cleance between the spacers and the toothed head using a depth gauge. Record the value determined.

Determine plug-in depth on the removed sender, using a depth gauge.

Record the value determined.

0 0

Post a comment