Replacing transmission oil Manual transmission and front final drive

Filling capacities:

Manual transmission: approx. 3.8 I Front final drive: approx. 1.2 I

Oil grade:

Transmission oil SAE 75 W 90 of API classification GL5 (or MIL-L-2105 B)

1. Remove the front underbody panel and engine guard.

2. Drain the oil with the vehicle level and transmission at operating temperature.



Front final drive

1 - Drain plug with magnet

2 - Filler plug

3. Clean filter plug and drain plug, replace seals and tighten with 30 Nm (22 ftlb).

4. With the vehicle level, fill with transmission oil until the filler plug overflows.


Manual transmission

1 - Drain plug with magnet

2 - Filler plug

0 0

Post a comment