Do not exceed a pressure of 2 bar (29 psi) when pressure bleeding the brake system. Excessive pressure will damage the brake fluid reservoir.

Connect bleeder hose and waste bottle to right rear caliper bleeder screw.

— Have helper hold brake pedal down.


Open bleeder screw (arrow). Have helper slowly pump brakes at least 12 times with bleeder screw open, holding pedal down on last pump.

• Close bleeder screw and release brake pedal.

• When finished, replace rubber bleeder cap.

Tightening Torques

• Bleeder screw (Turbo-look) 8 -11 Nm (6 - 8 ft-lb)

— Refill brake fluid reservoir and proceed to next wheel in order given above.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment