When working with hydraulic brake lines and hoses, be sure to counterhold fitting before loosening or tightening.
^ Rear brakes: Working at trailing arm, disconnect electrical connector (arrow) for brake pad wear sensor and remove harness from clip on trailing arm.
^ Disconnect metal brake line from brake caliper. Plug hydraulic fittings.
^ Remove caliper mounting bolts (arrows) and remove caliper. (Front caliper shown. Rear is similar).
— Inspect brake rotor for heat damage due to caliper pistons hanging up.
— Installation is reverse of removal.
— Bleed brakes as described earlier.
Was this article helpful?
The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.