Door panel removing and installing

^ Remove trim screw and trim piece (right arrow) at front door edge. Remove two screws behind trim piece.

— Pry off concealing plug at rear of trim panel and remove screw behind plug (left arrow).

— Remove upper trim panel by lifting up and over door lock pin.

Upper Door Panel 928 Porsche


Upper Door Panel 928 Porsche

^ Pry off cover from door lock knob (arrow). Remove knob mounting screw and knob.

— Remove lock knob trim by turning counterclockwise

^ Remove screws from map pocket perimeter (arrows) and remove carpeted map pocket.

— Remove two screws from pocket door hinge and remove map pocket door.

— Remove speaker grill screws and remove grill and speaker.

Pull door handle out and pry out actuating rod from handle.

Remove Door Panel Porsche 911


^ Remove bolts at bottom and top of door pull (arrows).

— Pry out power window switches from door panel.

Label wires on switches before disconnecting.

— Carefully unclip door panel at perimeter and remove.

— Installation is reverse of removal. Check door trim clips for damage. Replace any broken clips before reinstalling door panel.

Was this article helpful?

+1 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment