Door window regulator removing and installing

— Position window about halfway down.

— Remove door trim panel. See 570 Doors. Remove regulator arm support bolts (arrows).

— Disconnect electrical plug from window motor.

^ Remove bolt securing regulator to door (arrow).

— Slide both regulator guide wheels out of front window guide rail.

The guide wheels will not come out through the rear of the window guide rail.

Be sure tape holds well. If the window drops into the door unexpectedly, it will most likely shatter.

^ Push window into closed position and tape in place.

Porsche 911 Door Window Trim Install

^ Remove regulator through hole in door.

^ Lower regulator into door to access window motor. Unbolt window motor (arrows) from regulator and set inside door.

^ Remove regulator through hole in door.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Responses

Post a comment