Front suspension subframe assembly

The forged light alloy crossmember subframe can be accessed from under the car by removing the stone guard in back of the fuel tank. Details of the subframe assembly are shown in the illustration.

• Lubricate torsion bar adjustment screw with multipurpose MoSs grease.

• Be sure to reset front ride height as described in 440 Tires, Wheels, Alignment.

Tightening Torques

• Be sure to reset front ride height as described in 440 Tires, Wheels, Alignment.

Tightening Torques

Steering rack

to subframe (M10 x 20 mm)

47

Nm

(35

ft-lb)

Stone guard/ stabilizer rear bracket

to body (M10 bolt)

47

Nm

(35

ft-lb)

Stone guard/ stabilizer rear bracket

to crossmember subframe (M10 nut) ..

. 28

Nm

(21

ft-lb)

Subframe/control arm

to body (M12 x 1.5)

90

Nm

(66

ft-lb)

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment