General

The electric sunroof is operated by a motor drive and drive cables. The sunroof panel can be adjusted with out removing it from the car. Replacement of the sunroof liner or components such as the cable assembly require that the sunroof panel be removed. The sun roof drive motor is protected from damage by a slip coupling fitted between the motor and the drive.

Be sure to check the front and rear drains in the corners of the sunroof for blockage. If water is entering through the sunroof one of more of these drains are usually plugged.

Sunroof assembly

1.

Frame

21.

Washer

2.

Washer

22.

Terminal piece

3.

Lock plate

23.

Screw

4.

Guide

24.

Intermediate piece

5.

Leaf spring

25.

Cable

6.

Knurled nut

26.

Guide rail

7.

Plug

27.

Threaded plate

8.

Cover

28.

Reinforcement

9.

Velvet strip

29.

Plug

10.

Sealing rubber

30.

Guide piece

11.

Guide shoe

31.

Lock washer

12.

Support

32.

Bolt

13.

Motor

33.

Cable guide

14.

Clutch

34.

Beading

15.

Transmission

35.

Front seal

16.

Drive pinion

36.

Side seal

17.

Cap

37.

Clip

18.

Washer

38.

Protection cap

19.

Hand crank

39.

Wind deflector

20.

Screw

40.

Clamp

0019326

^ Remove screw from drive unit (arrow). Makes sure spacers) come off with screw.

The hand crank for closing the sunroof can usually be found in the glove box or in the tool kit.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment