Hood emergency opening with broken cable

— Remove front bumper assembly. See 630 Bumpers.

^ Locate and punch mark position 50 mm (2 in.) down from bottom of bumper trim panel and 25 mm (1 in.) to the left of body center line. Drill an 8 mm (5/16 in.) hole through front body panel.

^ Using a piece of stiff steel wire (6 mm or 1/4 in.) approximately 40 cm (16 in.) long, make a 90° bend 15 mm (0.6 in.) from wire end.

— Insert tool upward through hole in panel to catch hood release. Turn tool to right to release lock.

— Plug drilled hole (use Porsche part no. 999 703 044 50).

— Reinstall front bumper.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment