Test equipment

^ Some of the procedures require special tools.

Many tests in this section require checking for voltage, continuity or resistance at harness connector terminals. The blunt tips of a multimeter's probes can spread open the small connector terminals and cause poor connections. To prevent damage, use flat male connectors to probe the harness connector terminals.


A high impedance digital multimeter should be used for all voltage and resistance tests. An LED test light or a "noid" should be used in place of an incandescent-type test lamp.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment