Adjusting Door Window Targa

The methods of adjustment have been improved since introduction of electric cross-arm window regulators from 1980 models on. The Targa window regulators now have two adjustable stop brackets for height control. The adjusting screw has been omitted.

Before beginning with adjustments the door gap to the rear fender and installed position of the Targa top must be checked.

Adjusting procedures require that the hinge strip, door pocket with cover, grab handle, door inside trim panel and plastic sheet be removed.

Adjusting Door Window

- Height Adjustment (arrow) - Inclination

Panel Door Porsche 964
Lower window until stop bracket is accessible through opening in door inside panel.

Targa version with stop bracket

Adjust height so that window glass is aligned with roof seal and fits tight in profile seal along entire length.

Was this article helpful?

+1 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment