Info

REMOVING AND INSTALLING STEERING COLUMN SWITCH AND STEERING LOCK from 1981 Models

1. Pull off cover by hand.

5. Pull off spacer with a water pump pliers while turning simultaneously.

2. Loosen nut and take off steering wheel.

3. Remove mounting screws.

4. Loosen steering column switch, remove trim and disconnect multiple pin plug.

5. Pull off spacer with a water pump pliers while turning simultaneously.

6. Remove socket head screw on steering lock housing and pull off housing.

1. Pull off cover by hand.

2. Loosen nut and take off steering wheel.

3. Remove mounting screws.

4. Loosen steering column switch, remove trim and disconnect multiple pin plug.

Removing and installing Steering Column 94 - 19 Switch and Steering Lock from 1981 Models

REMOVING LOCK CYLINDER from 1981 Models

1. Mark steering lock housing according to size and drill an approx.3 mm dia. hole.

2. Press in retainer with a suitable tool (mandrel or scribe) and pull lock cylinder out of housing at same time.

94-20 Removing Lock Cylinder from

1981 Models

Removing

1. Pull off wires on stop light switch.

2. Tighten stop light switch and check function.

REMOVING AND INSTALLING STOP LIGHT SWITCH from 1981 Models

Note Installing

The first 1981 models had a stop light switch of 1. Adjust stop light switch so that distance between version A (short threads), which has been replaced brake pedal in neutral position and mounting by version B (long threads and two lock nuts). threads is 5 mm.

Removing

1. Pull off wires on stop light switch.

2. Tighten stop light switch and check function.

2. Unscrew mounting nut and pull stop light switch out of holder.

Removing and Installing Stop Light 94 - 21

Switch from 1981 Models

0 0

Post a comment