Remove: Engine guard
Front axle with steering box
Bumpers with brackets or front/rear impact absorbers Front apron
All damaged body parts (as required for straightening work) Also remove engine, if front end of car is seriously damaged
Prepare Celette stand: Mount all attachments of straightening set, except bumper attachments. Loosen mounting bolts on spring strut domes to place body on Celette stand.
Note: Check horizontal position of Celette stand with a water level.
Install bumper attachments only after positioning body.
Mounting point on transmission carrier
Mounting points on front axle attachments Set scales on spring strut domes and auxiliary carrier attachments at - zero.
Was this article helpful?