Removing And Installing Windshield Wiper Motor

Cable Linkage Wiper Motor

1. Unscrew cover over wiper motor.

3. When installing, connect the plug and turn on the ignition before securing the linkage.

Move wiper arms to off position and mount linkage.

4. Check function on a wet windshield. Correct wiped area if necessary.

2. Unscrew wiper linkage, disconnect plugs, unscrew motor, remove mounting screw on frame, lift frame slightly and take out motor.

Cable Drive Wiper

Printed in Germany

Removing and Installing Windshield Wiper Motor

Was this article helpful?

+2 0


Post a comment