Checking Warm Up Regulator Warm Engine

Warm Regulator Porsche 924

1. Disconnect wire connectors at warm-up regulator.

2. Disconnect electrical connector at air flow sensor. Turn on ignition.

3. Check power supply with voltmeter at disconnected plug. Voltage min. 11.5 V.

Printed in Germany Removing and Installing Warm-Up 25 - 21

Regulator - Checking Warm-Up Regulator

Warm Porsche 924 Turbo930 Porsche Engine Diagrams

4. Check heating coil, resistance of heating coil approx. 20 Ohm.

If heating coil has open circuit, replace warm-up regulator.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Responses

Post a comment