Info

Ignition System ^Q

5. Turn on ignition.

Voltmeter should display 5 to 6 volts for approx. 1 second and then drop to 0 volt.

6. Touch center wire (green) of Hall transmitter plug 3 |_| . (brown/white)

disconnected on distributor on ground briefly, using a piece of wire.

Voltage should rise as for turning on ignition and then drop again to 0 volt. 7 Measure voltage between both outside wires

H + and H - on plug with ignition turned on. Voltage should be at least 10 volts.

5. Turn on ignition.

Voltmeter should display 5 to 6 volts for approx. 1 second and then drop to 0 volt.

Replace Hall control unit when measured values deviate from specifications.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment