Checking Clutch Linings For Wear

Check for wear as follows.

2. Visually inspect position of release lever. Wear limit has been reached if front edge of lever is even with rear edge of inspection hole.

1. Remove inspection plug from bottom of bell housing.

A — Wear travel of clutch 17.4 mm B — Operation travel 17.4 mm

Checking clutch linings for Wear

Print«1 in Germany

2. Remove brace.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment