Installing

1. Guide entire clutch assembly into bell housing and center both clutch discs (hubs face release bearing) with short drive shaft.

Remove Pressure Plate From 928s

Removing and Installing Clutch

Printed in Germany

Remove Clutch From Porsche 928

To prevent clutch dragging, press the sliding mount for the bracket back with a screwdriver (in direction of pressure plate) until the gap is correct.

Note

Clutch discs are different. Solid center disc (I) is between flywheel and intermediate ring. Spring center disc (II) is between intermediate ring and pressure plate.

2. Tighten mounting bolts evenly. Tightening torque: 2.3 mkp (17 ft/lbs). Make sure that short drive shaft moves freely.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment