Note

Measuring point on cross member must be 110 ± 10 mm below center of wheel.

3. If necessary, adjust rear suspension height by tightening or loosening coil springs. Springs tightened — car higher. Springs ioosened — car lower.

Note

Height of rear suspension must be matched to actual height of front suspension.

Example:

If front of car is 20 mm too high, rear of car must be adjusted 20 mm too high.

Checking and Adjusting Wheel Alignment

It is best to check wheel alignment with optical wheel alignment equipment. Refer to equipment manufacturers operating instructions.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment