Assembling Fuel Injector

Cut off wire straps. Pull off wire plugs and disconnect retaining plates of fuel injectors at intake manifolds.

1, Clean outside of hose adapter on fuel distribution line.

2. Coat inside of new fuel hose with fuel and push hose sleeve on hose adapter against stop by hand.

Hose sleeve must be a tight fit.

Unscrew fuel lines, remembering to counterhold. Catch escaping fuel. Remove fuel distribution line.

Disassembling/Assembling Fuel Injector Removing and Installing Fuel Injectors

4. Pull off hoses and disconnect throttle cable. Pull wires off of microswitches, unscrew mounting bolts and remove throttle housing.

2, Connect vacuum hoses as follows:

1 To distributor (retard).

2 To decel valve/pressure regulator/pressure damper,

3 To distributor (advance)/vacuum check valve (charcoal filter).

3. Loosen upper hose clamps on connector between intake distributor and throttle housing. Remove intake distributor from above.

4. Pull off hoses and disconnect throttle cable. Pull wires off of microswitches, unscrew mounting bolts and remove throttle housing.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment