Assembly Instructions

OIL PUMP, REMOVING AND INSTALLING

R e m o v i n g l.Lock oil pump drive wheel with special tool 9157, unscrew retaining nuts and pull off drive wheel.

Note

Use special tool 9157/1 to lock oil pump drive wheels with HTD tooth shape (83 models onward).

Installing Note

Measure axial play before installation. The measurement must be carried out with the pump dry, in other words without oil.

l.Use gauge holder VW 387 and threaded section to measure axial play.

Axial play 0.08 to 0.12 mm

Special Tool Sporsche 9281984 Porsche 911 Gauge Wiring Pictures

2.If necessary, remove inner rotor.

Size 21 mm

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment