Calibrating the tank sensor system for Model 89 onwards


The system must be calibrated if the fuel tanks, tank sensor or backlit instrument cluster have been replaced.

1. Empty the fuel tank.

2. Fill with exactly 15 I (3.96 gallons) fuel.

3. Wait for at least 1 minute. Vehicle must remain stationary.

4. Pull the operating lever for the backlit instrument cluster, turning the ignition on at the same time. The following response appears in the left and right display boxes*

5. Press the reset button in the center console until 15 appears in the center display box.


Terminate calibration mode by switching off the ignition or starting the engine.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook

Post a comment