Correcting Co Level On Air Flow Sensor

Spoiler Hole PlugsPorsche Air Flow Repair

3. Close hole providing access to mixture control screw with a new plug after finishing adjustments. Press in plug flush.

1. Remove air flow sensor.

2. Drill hole in plug with a 2 mm dia. drill bit (up to stop on steel insert).

3. Pull out plug with a left-turning drill (no. 2).

1. Install air flow sensor.

2. Adjust engine idle speed and CO level. Turn mixture control screw accordingly with a screwdriver.

Turning clockwise = richer mixture Turning anticlockwise = leaner mixture

If CO level is not the specified value, remove plug from hole providing access to the mixture control screw. This requires removal of the air flow sensor

Note

Never reuse a drilled plug!

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment