Installing Upper And Lower Crankcase Sections

1. Apply a thin coat of Loctite 573 on crankcase lower section.

5. Tighten mounting nuts to final torque. See page 10 - 03 for specified torques and instructions.

Tighten to sequence.

2, Install crankcase lower section.

3, Install mounting nuts by hand.

2r<; 22

6. Mount upper section on engine holder after tightening nuts.

4. Install oil pump body, tightening first both upper bolts to specified torque.

7. Remove oil pump body.

Note

This is how crankcase upper and lower sections are located in longitudinal direction.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment