Installing

When installing, ensure that engine temperature is less than 74°C.

1.) Re-connect connector

2.) Switch ignition on.

Flap positioning motor moves to 0% position.

3.) Tighten securing nuts {3 nuts).

4.) Set adjusting arm so that the air flaps are in the 0% position when the actuating rod is installed.

5.) Press AC button

The positioning motor moves to the 30% position.

The 100% position is set off the 0% or 30% position.

Printed in Germany-XVII,1987 Removing and Installing 19 - 19

Cooling-Air Flap Motor"

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment