Machining Flywheel

The bearing surface for the drive plate on the flywheel can be machined in a lathe when seriously scored or burnt.

The metal removal should be kept as small as possible. Wear limit for flywheel thickness: 11.8 mm.

2 = Smallest possible metal removal

Bearing surface machining specifications: Surface finish + waviness = 0.008 mm.

MACHINING FLYWHEEL - Beginning with 1984 Models Engine Type M 28.21

13-10 b Machining Flywheel

Machining Flywheel — 1984 Models

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Responses

Post a comment