Removing And Installing Control Unit For Afc Fuel Injection And Oxygen Sensor

1. Loosen knurled head screw and remove cover for elapsed mileage switch.

2. Push in reset button on elapsed mileage switch against stop with a suitable tool. The elapsed mileage switch will return to zero and the oxygen sensor indicator light will again operate normally.

2. Loosen three mounting screws and remove control unit.

An elapsed mileage switch is mounted to the right of the passenger's seat to monitor the time of operation. It will turn on an indicator lamp for the oxygen sensor after the car has been driven 30, 000 miles. The elapsed mileage switch must be reset to zero each time the oxygen sensor is replaced.

1. Loosen knurled head screw and remove cover for elapsed mileage switch.

2. Push in reset button on elapsed mileage switch against stop with a suitable tool. The elapsed mileage switch will return to zero and the oxygen sensor indicator light will again operate normally.

This control unit is mounted on right wheel housing in passenger's footwell.

Removing

1, Push up plug clip to unlock the plug.

2. Loosen three mounting screws and remove control unit.

Make sure plug fits properly and can be felt to engage.

25 - 26 Resetting Elapsed Mileage Switch Printed in Germany

Removing and Installing Control Unit for AFC Fuel Injection and Oxveen Ken cor

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment