Removing And Installing Door

1. Pull off knob, unscrew knob liner and remove together with bearing shell.

S. Remove door vent nozzle and unscrew bolt located behind latter. Detach cover on connecting tube.

3, Remove side nozzle. Remove outside mirror switch. Note wire colors and pull off plugs.

6. Take off door trim panel from clips at bottom and remove with armrest.

7. Disconnect loudspeaker connections from door panel, pull off covering at narrowest opening point and saw through land, so that wire harness and vacuum hoses can be pulled through. Remove door panel.

2. Unscrew grip shell on inside grip. Remove door trim panel from clips.

3, Remove side nozzle. Remove outside mirror switch. Note wire colors and pull off plugs.

6. Take off door trim panel from clips at bottom and remove with armrest.

7. Disconnect loudspeaker connections from door panel, pull off covering at narrowest opening point and saw through land, so that wire harness and vacuum hoses can be pulled through. Remove door panel.

Remove Door Panel Porsche 928

8. Pull off inside window sealing rail. Unclip window frame trim at top carefully and remove.

9. Pull off door sealing sheet.

10. Detach door retainer and hinges, and take off door.

If there is door retainer noise, spray door retainer and retaining rod with a sliding metal lubricant, e.g. Metal-lit from Bielefeld.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

Post a comment