Test Point

Throttle Switch.

1. Idle Speed Contact

Pull off multiple pin plugs on LH and electronic ignition control units.

1.1 Connect ohmmeter between terminals 3 and 5 on LH plug.

Specifications:

throttle closed = 0 ohm throttle opened = inf. ohms

Switching over must take place already with a throttle gap of approx. 1

2. Full Load Contact

2.1 Connect ohmmeter between terminals 12 and 5 on LH plug.

Specifications:

throttle closed = inf. ohms throttle in full load pos. = 0 ohm

Switching point is after approx. 3/4 throttle travel.

Make tests direct on throttle switch, if switching points are not reached.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment