Removing Note

in left-hand drive vehicles the electronic control unit is located on the driver's side, above the hood release on the side panel of the footwell

In right hand drive vehicles the electronic control unit is located above the central fuse relay board.

1. Move back seat and pull up steering wheel (to make job easier).

2. Press spring-loaded lock and pul plug off of electronic control unit.

3. Take electronic control unit off of bracket after unscrewing mounting nuts.

Left-hand drive vehicles

95a?

Installing

1. Mount electronic control unit on bracket.

2. Connect ARS tester. Connect plug of electronic control unit with plug of tester for this purpose.

95a?

Installing

1. Mount electronic control unit on bracket.

2. Connect ARS tester. Connect plug of electronic control unit with plug of tester for this purpose.

Plug in tester plug on electronic control unit, making sure spring-loaded lock is heard to engage on plug

Turn of ignition before disconnecting multiple pin plug on control unit or removing control unit.

Left-hand drive vehicles

Right-hand drive vehicles

3. Check function.

Note:

Car must not be operated as long as tester is connected.

4. After finishing function test, disconnect tester and connect multiple pin plug on electronic control unit correctly (spring-loaded lock must be heard to engage).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment