Models 82

You can check the indicators for coolant temperature, tank and oil pressure with the VAG 1301* test unit.

The connection cable must be disconnected from the relevant sensor for this.

The appropriate values are set on the test unit according to the following table. Switch on the ignition. If the instrument indicates the correct value, replace the sensor. If the instrument indicates an incorrect value or no value at all, check the cableto the instrument and replace the instrument if necessary. One pointer width to the rightor left is a permissible deviation.

See workshop manual Chapter 3 Groups 9/10.

Coolant temperature (°C)

Test unit setting

Resistance (O )

40 105 120

287.4

33.6

22.7

73/90

Tank

Test unit

Resistance (O )

setting

RES

122 - 123

71.6

1/4

96- 97

58.7

1/2

47- 48

34.5

3/4

9- 10

15,3

1/1

No setting possible

3.2

Oil pressure

(bar)

0

No setting possible

10.0

3

212 - 213

116.0

5

349 - 350

184.0

As from Model 85/2

-

Coolant

temperature (°C)

40

557 - 558

287.4

60

247 - 248

134.0

80

117-118

69.1

100

55 -56

38.5

115

30 - 31

25.8

74/90

Tank

Test unit

Resistance (ft)

setting

RES

105 - 106

63.2

1/4

63-64

42.2

1/2

21- 22

21,2

3/4

No setting possible

8.6

1/1

No setting possible

2.8

Oil pressure

bar

1

37- 38

29.6

2

110-111

65.3

3

177-178

98.9

4

246 - 247

133.6

5

349 - 350

184.0

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment