Assembly Notes For Disassembly And Assembly

Disassembly

Unlock cage by turning in direction of arrow and remove downwards.

Assembly

1. Combine 10 segments in one ring.

2. Install springs and rollers. Pay attention to correct installation position. In clockwise direction, spring is located before roller. Install guide lug (arrow) as shown with respect to rollers.

3. Insert cage with rollers into outer race in correct position from below (arrow direction A).

1 = Small retaining lugs pointing upwards

2 = Large retaining lugs pointing downwards

4. Lock cage by turning in direction of arrow.

Was this article helpful?

0 0

Post a comment