Checking Oil Level Replacing Manual Transmission

Capacity: Approx. 2 l hypoid transmission oil SAE 75 W 90 to APl Class GL or MIL-L 2105 B, or SAE 80 to API Class GL 4 or MIL-L 2105.

1. Clean outside of filler and drain plugs, and unscrew.

Note

The fluid level in the transmission housings used in production is approx. 6 to 8 mm below the filler neck when 2 liters of transmission oil have been filled in.

1 - Drain plug

2 - Filler plug

2. Drain transmission oil of a car parked on level ground or floor and transmission having operating temperature.

3. Clean filler and drain plugs, and torque to 24 Nm.

4. Pour in transmission oil with car parked on level surface.

4?1

Was this article helpful?

0 0

Post a comment