It is always necessary to loosen the control cable to test the main pressure. This means maladjusting the cable sleeve on the mount in the area of the cam plate. Preload must be readjusted after finishing the pressure test (see page 37 - 11).

1. Connect pressure tester V 90 on the test connection.

A = Special Tool 9250

2. Check main pressure with different testing conditions as described below.

944 Europe / Rest of World and USA/Japan

Selector Lever Position

Accelerator Pedal Position

Main Pressure in bar

Testing Conditions

Was this article helpful?

0 0

Post a comment