Bleeding is divided into three steps. The first step can be omitted where appropriate.

1 st step: Preparatory measures for first assembly or re-installation

2nd step: Bleeding the pressure accumulator and the valve block

3rd step: Bleeding the lock cylinders and pressure lines (as on Page 47 - 5)

In the case of replacement or removal of the pump assembly, pressure accumulator and valve block, these instructions (procedures) must be observed exactly. If a different procedure is followed, heavy foaming of the brake fluid may occur.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook

Post a comment