- Gearbox cold / handbrake released, no gear engaged

- Before measuring, briefly close lock once (applying full pressure)

- To measure locking moment, only turn towards the front. Measuring should be performed via the adapter plate on rear left-hand wheel hub

- Completely lock both front wheels and rear right-hand wheel by means of footbrake

- Use torque wrench to measure breakaway moment / locking moment at prescribed testing pressures. Do not turn jerkily. Work up gradually from lower value to breakaway moment / locking moment.

- Produce test pressures with System Tester 9288 by activating transverse lock solenoid valve (menue drive links / check transverse lock).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment