The sensors are installed on a sheet metal console on the tunnel underneath the center console. These sensors are required for all wheel drive and antiblock systems.

1 - Lateral acceleration sensor

2 - Axial acceleration sensor

1. Park car on level ground (level floor).

2. Check levelness of the sheet metal console with a bubble level. Replace a bent sheet metal console.

3. Connecting leads must not be mixed up. Plug receptacles have different colors for identification.

Black plug receptacle for the lateral acceleration sensor.

Gray plug receptacle for the axial acceleration sensor.

4. Sensors must not be subjected to any type of extreme acceleration such as from throwing, falling or knocking.

5. Sensors must always be inspected after an accident. Sensors must be replaced if they are not within specifications.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment