Test pressures measuring items

Measurement 1 = press, from 0...5 bar

Measurement 2 = Measurement 3 -Measurement 4 =

" 20...40 bar " 40...60 bar breakaway moment min. 500 Nm (367 ftlb pressure 80 bar or greater

Measurement 5 = Check transverse lock admission valve. Prescribed value approx. 2.0...3.5 bar - Observe checking conditions on left

- Switch on System Tester. Select "check transverse lock"

- Completely close transverse lock by means of approx. 20 impulses (pressure at manometer approx.

«140...180 bar). Pressing function button on Tester = 1 Impulse

- Move to position for pressure reduction and start with measurement 1

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment