Removing and Installing Crash Sensors Note

Crash sensors are mounted in the luggage compartment on left and right sides in front of the spring strut domes.

The installed position is given by installation.

Plugs are located at the left on the firewall and at right below the central electric board.

1. Disconnect battery and cover pole or battery.

2. Disconnect plug.

3. Unscrew shear-off nuts with Special Tool

9259.

281-68

Special Tool 9259

Note

Use a 1/4 inch socket to tighten the shear-off nuts.

Mounting points on the body must show blank metal.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment