Seats911 Carrera

Tools Table

1. Digital-voltmeter with an internal resistance Ambient temperature in'C Voltage in V

2. Two measuring probes with a maximum 2 1.55 diameter of 2 mm. 4 1.60

3. Thermometer (as recommended in the 8 1.70 Workshop Handbook).

10 1.75

14 1.85

5. Two auxiliary cables to supply voltage to 16 1.90

the removed seat (terminals 15 and 31). Use 18 1.95 adapter cable 9269 for seat-position control.

20 2.00

Calibration procedure 22 2.05

1. Store the seat to be calibrated in the work- 24 2.10 ing area until it has assumed the ambient 26 2.15 temperature. 28 2.20

2. Provide power supply. 30 2.25

32 2.30

Note 34 2.35

Do not switch on the seat heating. If switched 36 2 40

on unintentionally, the seat must cool down 38 2-4®

until the heating elements have again adopted the ambient temperature. 40 2 50

42 2.55

3. Measure the ambient temperature and refer 44 2 60 to the table for the relevant voltage value. 4® 2 65

48 2.70

4. Connect the voltmeter to the control unit (A).

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment