Notes on assembly

Mount reverse idler gear with friction washers and bolt in the correct position (refer to explosion drawing). If friction washers and bolts are in the correct position, the front surface of the bolt is approx. 1.5 mm lower than the case casting and the reverse idler gear has an axial play of 0.15...0.35 mm.

A = approx. 1.5 mm 88/340

911 Carrera 4 Manual Transmission, Controls, Case

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook

Post a comment