Notes on disassembly and assembly

Disassembling

1. Remove lock nut with Special Tools 9142, 9142/1 and 9282.

9142 /

Vft^X 9142/1 / /

L. 9282 /A/

/tt^-L ----- L&s/o/

Assembling

1. Heat cylindrical-roller bearing up to approx. 120 °C (248 °F) and press into correct position.

Note

Fit the bearing in such a way that the collar of the roller cage points towards the four-point bearing.

120-35

2. Heat inner bearing rings for four-point bearing up to approx. 120 °C (248 °F) and press into correct position.

187-35

A = larger inner race (outer diameter

56 mm), points towards pinion head when installed

B = smaller inner race (outer diameter 53.5 mm), points towards fixed gear - 4th gear when installed

911 Carrera 4 Manual Transmission, Gears, Shafts

3. Tighten lock nut with 240 Nm (177 ft.lb.) and recess a collar to secure

211 - 35
119-35
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment