Adjustment of end stop and rotary support

Note

To prevent the headlights from vibrating, the rotary support must be preloaded slightly when it is up against the end stop.

1. Raise headlights.

2. Remove cap at pop-up headlight.

3. Mark motor position on knurled wheel.

4. Turn back 2 turns at the knurled wheel.

5. Adjust stop so that the rotary support is up against the stop without play as well as without preload.

Chevy Sonic Engine Support Fixture
829-94A

Note

If the adjustment range of the end stop is not sufficient, adjust at the joint rod.

Adjusting the cover ring

To adjust the cover ring with reference to the fender aperture, raise the pop-up headlights. Adjust the cover ring so that it is centered with regard to the fender aperture.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment