Applying TDC mark to camshaft sprocket

Engine Type M 44.43/44

Note

Camshaft sprockets supplied by the spares department do not have the TDC marks. The TDC mark is applied after the camshaft has been adjusted on the new engine.

1. Place new camshaft sprocket exactly over old camshaft sprocket and transfer TDC mark to new sprocket using a color pen.

2. Fit new camshaft sprocket and adjust camshaft according to instructions on page 15 - 4 to 15 - 6 in Repair Manual.

3. Following item 13, page 15-6, apply the final TDC mark to the new camshaft sprocket, using a three-square file and referring to page 15-4, Fig. 1.

Applying TDC mark to camshaft sprocket Printed in Germany - IV, 1992

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment