Camshaft adjustment gauge shopmade

Engine Type M 44.43/44 Tools

Note

1. If color marks or casting lugs are missing on the camshafts, use the camshaft adjusting gauge (shop-made) for referencing the camshafts.

2. After having placed the camshafts into the timing chain, the attribution of the cams of cylinder 1 may be checked with the gauge. Rotate both camshafts against each other so that the lower chain section is tensioned

Check again after the bearing saddles have been tightened.

Fitting the camshafts

Tools

No.

Designation

Special tool

Order number

Explanation

1

Mounting saddles for removal and installation of camshafts

9248

000.721.924.80

Used In conjunction with tensioning pins of Special Tool 9226

2

Thrust piece for seal

9234

000.721.923.40

3

Assembly sleeve for seal

9233

000.721.923.30

4

Assembly tools

9530

000.721.953.00

For fitting of "VarioCam" camshaft adjuster and hydraulic toothed belt tensioner

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment