Checking idle speed and CO level on vehicles with catalytic converter

Engine Type M 44.43/44 Note

Idle and CO level adjustment is no longer possible on vehicles fitted with catalytic converter. When checking the idle CO level, the oxygen sensor is not disconnected.

Check requirements

Perfect condition of the mechanical engine components. Loads must be turned off while checks are made. Perform checks as rapidly as possible to avoid excessive heat buildup in the inlet ducts as this would give faulty CO level readings. Ambient temperature 15-35 deg. C.

1. Connect commercially available exhaust gas adapter to test connector of catalytic converter.

2. Warm up engine to operating temperature. (Oil temperature 70 to 90°C), check with oil temperature tester (Special Tool 9122 and 9122/2).

3. Do not disconnect oygen sensor connector. Connect CO level measuring instrument and separate tachometer according to manufacturer's instructions.

Idle speed:

Engine Type M 44.43 840 ± 40 rpm Engine Type M 44.44 880 ± 40 rpm


Checking idle speed and CO level on vehicles with catalytic converter Printed In Germany - II, 1991

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment