Fitting the camshaft seal

1. Place sealing washers or lock pins, respectively, into bearing surfaces and fit bearing saddle, applying some Loctite 574. Tightening torque: 20 Nm (15 ftlb).

(062-15

2. The seal cover may only be used with Special Tool 9234 after the bearing saddle has been tightened.

Engine fitted Note

If the sealing cover leaks with the engine fitted to the vehicle, fit the sealing cover as follows:

1. Place sealing washers or lock pins, respectively, into bearing surfaces.

2. Coat bearing saddle with Loctite 574 and fit saddle. Place a 0.02 mm feeler gauge between bearing saddle and cylinder head and manually tighten bolts lightly.

1064-15

3. Oil sealing cover lightly and press in manually. Tighten bearing saddle to specified torque.

Tightening torque: 20 Nm (15 ftlb)

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment